Planar LC40 Product Manual
16
• To select another item on the Sub menu, press the [MENU] button.
Adjustment or Setting
For each item selected, the adjustment/setting has been made by pressing the
[ ] and/or [ ] button. This monitor saves adjusted value at intervals of about
5 seconds. Do not turn off the monitor for at the least 5 seconds after adjustment
or setting. (The detail steps for each item are described in the page 17-48)
[ ] and/or [ ] button. This monitor saves adjusted value at intervals of about
5 seconds. Do not turn off the monitor for at the least 5 seconds after adjustment
or setting. (The detail steps for each item are described in the page 17-48)
5
picture
advanced
pip
adv pip
options
utilities
Main menu
(Ex.)
Sub menu
brightness
25 -
+
contrast
50 -
+
H position
50 -
+
V position
50 -
+
phase
15 -
+
1056
frequency
-
+
scaling
Wide
Select the item to be adjusted on the Main Menu
Select the item to be adjusted by moving the cursor on the Main menu with the
[
[
] and/or [
] button and then press the [ENTER] button. You can see the
cursor moving to the Sub menu.
Select the item to be adjusted on the Sub Menu
Select the item to be adjusted by moving the cursor on the Sub menu with the
[
[
] and/or [
] button and then press the [ENTER] button.
• The selected item turns blue and then it is possible to control the item.
3
4
In case that Composite Video, S-Video and Component Video cables are
connected, each adjustment procedure needs to be done for Composite Video,
S-Video and Component Video, separately.
connected, each adjustment procedure needs to be done for Composite Video,
S-Video and Component Video, separately.
NOTE