Planar PL1910M Product Manual

 

3 

Please read the following instructions carefully. This manual should be retained for future use.   
1.  To clean LCD Monitor screen;   

-- Power off LCD Monitor and unplug the AC Cord.   

  -- Spray a non-solvent cleaning solution onto a rag.   

-- Gently clean the screen with dampened rag.   

2.  Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can 

severely damage it.   

3.  Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.   
4.  Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be performed 

by an authorized technician.   

5.  Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD 

Monitor outside this range could result in permanent damage.   

6.  If any of the following occurs, immediately unplug your monitor and call an authorized technician.   

*    Monitor to PC signal cable is frayed or damaged.   
*    Liquid spilled into LCD Monitor or the monitor has been exposed to rain.   
*    LCD Monitor or the case is damaged.   

7.  A certified line is required to connect this device to a power outlet. For a nominal current up to 6A and a device 

weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm

2

 must be used. 

 

 

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF 
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE 
ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL 
INFORMATION CHECK WWW.LAMPRECYCLE.ORG.