Becker highspeed 7934 Operating Guide

>>>

GENERAL OPERATIONS

> US

The USB port is used to link the Traffic
Assist Highspeed directly to a personal
computer. 
For transfers, the Microsoft

®

 Active Sync

program must be installed on the comput-
er. This is available free-of-charge from
the manufacturer.

The link then involves several steps:
> switch off Traffic Assist Highspeed.
> link the Traffic Assist Highspeed and

computer using the USB cable.

> switch the Traffic Assist Highspeed

back on.

ActiveSync automatically sets up a link to
the Traffic Assist Highspeed.

The installation software from the DVD
should be used for the transfer. This in-
volves the following stages:
> switch off Traffic Assist Highspeed.
> remove memory card and plug into an

SD card reading device or use the USB
cable to connect the Traffic Assist
Highspeed to the computer.

> boot up the computer and insert the

DVD.

> use the installation program to transfer

the map required.

> slide the memory card back into the

Traffic Assist Highspeed or correctly re-
move the USB cable.

> switch the Traffic Assist Highspeed

back on. The new map is available right
away.

The map data is preinstalled on the card
supplied with the unit. If you intend to
listen to music or view images using the
Traffic Assist Highspeed, you can save
these to the free space on the memory
card. If you require more memory space,
you must save further images or music
tracks to a separate card (not included).
The separate card must be formatted with
the FAT 16 file system.
Files can be transferred via a card reader or
the USB port.

Note:
Use obvious folder names because these
will help you later when you are trying to
find the file you want in the Traffic Assist
Highspeed.