Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sonance
  4. BPS-1
  5. Installation Instruction

Sonance BPS-1 Installation Instruction

Download
Page of 8
Connecting the Vent Tube and Bandpass Connector
1.  Use a Phillips screwdriver to remove the four screws that attach the paint shield to the Architectural
Series Panel Bracket (see Figure 7).
2. Feed several inches of the Vent Tube through the Panel Bracket’s speaker opening (see Figure 8).
3. Fit the Vent Tube Clamp (included with the Bandpass Connector) loosely around the vent tube (see
Figure 9).
4. Insert the Bandpass Connector ’s neck
into the Vent Tube opening (see Figure
10).
Insert Bandpass
Connector Neck
Into Vent Tube
Fit Clamp
Onto
Vent Tube
Figure 9: Fit the Clamp Onto the Vent Tube
Figure 10: Fit the Bandpass Connector Neck 
Into the Vent Tube
Page 4 of 8
B6R
Sonance Architectural Series
5/8”
DRYWALL
WWW.SONANCE.COM
800.582.7777
Remove
Screws
Figure 7: Remove Panel Bracket
Paint Shield
Figure 8: Pull End of Vent Tube
Through Opening in Panel Bracket
Sonance Architectural Series
®
BPS -1 IN-CEILING SUBWOOFER
I N S T A L L A T I O N   M A N U A L