Sonance cr101 Installation Instruction
Woofer
6-1/2" (165mm) Black poly cone with a rubber surround
Tweeter
1/2" (12mm) Cloth dome
Frequency Response
65Hz to 20kHz +/- 3dB
Efficiency
88dB 1w 1m
Power
5 watts minimum to 80 watts maximum
Impedance
8 ohms nominal 6 ohms minimum
Grille
Aluminum
Speaker Dimensions
9-3/4" (248mm) diameter x 3-3/4" (95mm) deep
Cutout Dimensions
8-5/32" (207mm) diameter
Weight
7.0 lbs per pair
CR101
Woofer
6-1/2" (165mm) Black poly cone with a rubber surround
Tweeter
3/4" (19mm) Cloth dome, pivoting
Frequency Response
60Hz to 20kHz +/- 3dB
Efficiency
88dB 1w 1m
Power
5 watts minimum to 100 watts maximum
Impedance
8 ohms nominal 6 ohms minimum
Grille
Aluminum
Speaker Dimensions
9-3/4" (248mm) diameter x 3-3/4" (95mm) deep
Cutout Dimensions
8-5/32" (207mm) diameter
Weight
7.0 lbs per pair
CR201
Woofer
6-1/2" (165mm) Black poly cone with a rubber surround
Tweeter
Two 1/2" (12mm) Cloth domes
Frequency Response
65Hz to 20kHz +/- 3dB
Efficiency
88dB 1w 1m
Power
5 watts minimum to 80 watts maximum
Impedance
8 ohms nominal 6 ohms minimum
Grille
Aluminum
Speaker Dimensions
9-3/4" (248mm) diameter x 3-3/4" (95mm) deep
Cutout Dimensions
8-5/32" (207mm) diameter
Weight
3.5 lbs each
CR101 SST
TECHNICAL ASSISTANCE AND SERVICE
The Technical Assistance Department at Sonance is available at (800)
582-0772 or (949) 492-7777 to answer any questions concerning the
operation and installation of your speakers between the hours of 7:00
AM and 5:00 PM Pacific time, Monday through Friday, except holidays.
582-0772 or (949) 492-7777 to answer any questions concerning the
operation and installation of your speakers between the hours of 7:00
AM and 5:00 PM Pacific time, Monday through Friday, except holidays.
In the event your unit should need repair or service, you may return
the unit to your authorized dealer or use the following guidelines:
the unit to your authorized dealer or use the following guidelines:
1. Be prepared to state the model number and / or serial number,
date of purchase and dealer's name and address when calling.
2. Contact Sonance directly at (800) 582-0772 or (949) 492-7777 or
at www.sonance.com
3. If you are returning the product directly to Sonance, call us to
obtain a return authorization number before shipping. YOU MUST
HAVE PRIOR AUTHORIZATION TO RETURN YOUR UNIT.
4. The original packaging must be used. If the original packaging is
unavailable, replacements can be obtained from Sonance for a
small fee.
5. Ship the product via United Parcel Service, Federal Express, or
RPS. Please do not use the U.S. Mail service.
6. Write the return authorization number on the outside of the box.
7. Ship to:
Attn: Quality Assurance Department
Sonance
212 Avenida Fabricante
San Clemente, CA 92672-7531
212 Avenida Fabricante
San Clemente, CA 92672-7531
8. FREIGHT COLLECT SHIPMENTS WILL BE REFUSED !
Sonance • 212 Avenida Fabricante • San Clemente, CA 92672-7531, USA • (800) 582-7777 or (949)492-7777 • FAX: (949) 361-5151 • Technical Support: (800) 582-0772
©2006 Sonance. All rights reserved Sonance , RotoLock, and Sonafill are registered trademarks of Dana Innovations.
WARRANTY COVERAGE ( U.S. ONLY )
If, within five (5) years from the date shown on the bill of sale, the
unit fails due to a defect in workmanship or material, Sonance will, at
its option and at no charge, repair or replace the components of such
unit which prove to be defective. For this warranty to be effective, the
bill of sale must show that the unit was purchased from an "Authorized
Sonance Dealer" and must list the price paid. This warranty shall apply
exclusively to the original purchaser and shall not apply to units
purchased for industrial or commercial use.
unit fails due to a defect in workmanship or material, Sonance will, at
its option and at no charge, repair or replace the components of such
unit which prove to be defective. For this warranty to be effective, the
bill of sale must show that the unit was purchased from an "Authorized
Sonance Dealer" and must list the price paid. This warranty shall apply
exclusively to the original purchaser and shall not apply to units
purchased for industrial or commercial use.
Furthermore, this warranty shall not apply if:
1. Damage to the unit was caused by accident, abuse or misuse;
2. The unit was opened, modified, or repaired by unauthorized
personnel.
3. The unit was not used as outlined in the operating instructions.
EXCLUSIONS AND LIMITATIONS
The warranty set forth above is in lieu of all other warranties,
expressed or implied, of merchantability, fitness for a particular
purpose, or otherwise. The warranty is limited to Sonance products
registered herein and specifically excludes any damage to
loudspeakers and other allied or associated equipment which may
result for any reason from use with this product. Sonance shall in no
event be liable for incidental or consequential damages arising from
any breach of this warranty or otherwise. This warranty gives you
specific legal rights, and you may have rights which vary from state to
state.
expressed or implied, of merchantability, fitness for a particular
purpose, or otherwise. The warranty is limited to Sonance products
registered herein and specifically excludes any damage to
loudspeakers and other allied or associated equipment which may
result for any reason from use with this product. Sonance shall in no
event be liable for incidental or consequential damages arising from
any breach of this warranty or otherwise. This warranty gives you
specific legal rights, and you may have rights which vary from state to
state.
Woofer
8" (203mm) Black poly cone with a rubber surround
Tweeter
1" (25mm) Pivoting Cloth dome
Frequency Response
47Hz to 20kHz +/- 3dB
Efficiency
89dB 1w 1m
Power
5 watts minimum to 120 watts maximum
Impedance
8 ohms nominal 6 ohms minimum
Grille
Aluminum
Speaker Dimensions
12" (303mm) diameter x 4 " (100mm) deep
Cutout Dimensions
10" (254mm) diameter
Weight
12 lbs per pair
CR801
www.sonance.com
33-2278 03/06