Coby tv-dvd1050 User Guide

7 

 
When you turn on the unit, it will be set to the last channel watched before the unit was turned off.  

Press the Menu button on the unit (or the TV Menu key on the remote control). This will display the TV 
menu on screen.  

A pair of red arrows to the left of a menu item indicates the current selection. Press the CH+/CH– keys to 
scroll through the items up and down. Press the V+/V– keys to enter the selected item’s submenu. When 
you have selected an item that has modifiable values, press the V+/V– keys to change its settings. 

Press the Menu key to send the selection back one menu level.  

  PICTURE  

 

 

  

(“System” has been selected in this example) 

TV mode is used to receive local over-the-air (OTA) TV signals. Attach a rod antenna to the External 
Antenna jack on the rear of the unit to receive TV signals. Adjust the angle of the rod antenna to gain 
better reception. 

CATV mode is used to receive cable TV signals. Attach a CATV cable to the External Antenna jack on 
the rear of the unit to receive cable TV signals. 

1.  Press the Menu button on the unit (or the TV Menu key on the remote control). This will display the 

TV menu on screen. 

2.  Highlight the item PRESET (press the CH+ or CH– key to change which item is highlighted).  

3.  Press the Volume Up (V+) key to enter the PRESET submenu. 

4.  Highlight the item AREA (press the CH+ or CH– key to change which item is highlighted). 

5.  Press the Volume Up (V+) key to change between TV mode and CATV mode.  

6.  Press the Menu button twice to exit the TV menu. 

 

TV mode is used to watch television. 

DVD mode is used to watch DVDs with the built-in DVD player. See the DVD Operation section for more 
information. 

AV Mode is used to watch video from an external source (e.g., VCRs, camcorders, portable media 
players, etc). You can also watch SECAM/PAL/NTSC356/NTSC443 multi-system programs in AV mode.