Neuros digital audio computer User Guide

 

22

With Neuros Firmware 2, “on-the-fly” backpack swapping is available. When you use the 
128 MB Neuros backpack, music you synchronize is stored on the internal flash chip on the 

player. You can now save the flash chip contents (tracks, recordings, playlists, presets, etc.) 
when you insert the player into the hard drive backpack. When the player is inserted in the 
hard drive backpack, a message will appear, asking if you wish to “Save Flash Contents to 

Hard Drive”. Clicking Yes will begin saving the flash memory contents onto the hard drive. 
When you are ready to use the smaller backpack, before you remove the player from 

the Hard Drive backpack, Go to Settings on the main menu and select “Backpack Swap”. 
Then select “Restore Flash” and “Yes”. The contents of the flash chip will be restored and 

the Neuros will shut down. When the player is reinserted in the smaller backpack, the flash 
contents will be restored and ready to play. 

 

Users can easily upgrade their Neuros Synch Manager Application and Neuros device 

firmware through the Check for Updates options available in the NSM Help Menu We have 
made the update process automatic.  

 
To update firmware or software: 

1.  You must be connected to the Internet to update your Neuros Sync Manager 

application software and your Neuros device firmware. 

2.  From the Neuros Sync Manager, select Help and then select either Check for NSM 

Software Updates or Check for Neuros Firmware Updates. 

3.  For firmware updates, select the Synchronization button to transfer these upgrades 

to your Neuros. 

4.  Follow the PC prompts for NSM application updates and follow the Neuros display 

prompts for firmware updates.  

NOTE: If you have a USB 2.0 backpack, you must have Neuros FW 2 installed. Do 
not use firmware version 1.45 or lower with your USB 2 backpack. 

Problem 

Solution 

Neuros is not responding to button clicks. 

Screen is frozen or device stopped 
working. 

1.  Make sure keypad lock is in the 

down position. 

2.  Shut off Neuros by pressing Up on 

the Joystick button and the Play 
button at the same time.  

3.  Wait 15 seconds. Press and hold 

Play to restart.  

MyFi not working. 

MyFi Off is selected. From the settings 

menu, make sure MyFi is set to Auto 
Detect. 
 

MyFi does not have good reception. 

See the MyFi FAQs at 
www.neurosaudio.com/support/MyFifaq.asp  

I am trying to make a voice or line-in 

recording, but only a 30- second HiSi 
Recording is made. 

Click the   button to stop the HiSi 
recording. Double-click the   HiSi button 
to make a recording. 

I just Synchronized the Neuros with 

See “Orphan Tracks” in the Table of