Aethra d2000 lite User Manual
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 MANUALE D’USO
In Simulation mode you can select the looped or cross-looped B channels and
display the connected remote number in the last line of the screen of page 2, if
available. If the delay is available for the selected channel, § 3.13.3, the instrument
displays it in alternation with the connected number. Press ENTER on the selected
channel to disconnect the associated call.
display the connected remote number in the last line of the screen of page 2, if
available. If the delay is available for the selected channel, § 3.13.3, the instrument
displays it in alternation with the connected number. Press ENTER on the selected
channel to disconnect the associated call.
In Monitor mode you can select the B channels with activity and display the
connected remote number in the last line of the display, if available. Press ENTER on
the selected channel to listen to the audio of the associated call.
connected remote number in the last line of the display, if available. Press ENTER on
the selected channel to listen to the audio of the associated call.
In Monitor mode information on the B channel is only given with
the 'MONITOR' test in progress and only refers to the
connections established after the START.
the 'MONITOR' test in progress and only refers to the
connections established after the START.
Depending on the device owned, you will have the following displays:
3
Selects a B channel and displays the remote number
connected.
connected.
PRI simulation
BRI simulation
118
CAPITOLO 7. SMART STATUS