Aethra d2000 lite User Manual
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
You can save and/or print the test results at the end of the test. See chapter 11 for
more information about saving and printing.
more information about saving and printing.
To automatically obtain a complete indication on the access
configuration, enter the number of the tested access as “CALLED
NUMBER”.
configuration, enter the number of the tested access as “CALLED
NUMBER”.
Specific manual tests are recommended in case of not available
services or profiles. See chapter 3.
services or profiles. See chapter 3.
2.4. Performing an X.25 Access Test
Use this test to verify if and which link (TEI) supports the X.25 service (SAPI 16). A
further test may be performed in order to control the availability of the LCI given to
the access.
further test may be performed in order to control the availability of the LCI given to
the access.
2.4.1. Setting up an X.25 Access Test
In order to verify the TEI enabled to X.25 service, no parameter configuration is
needed. For the test regarding LCI, the following parameters can be defined:
needed. For the test regarding LCI, the following parameters can be defined:
1
Set the test parameters.
30
CHAPTER 2 - PERFORMING AN AUTOMATIC TEST