Aethra d2000 lite User Manual
USER’S MANUAL ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000
During the test the instrument makes a loop on every active B channel.
The screen indicates the total number of calls and the number of failed cycles the
instrument has detected.
instrument has detected.
“Failure” means that the instrument was not able to make all
calls.
calls.
To view and analyze failures:
4
Scroll through the pages indicating a failed call with related
information. Observe that the cause number for each
failure appears on the screen.
information. Observe that the cause number for each
failure appears on the screen.
This example shows Failure 1 with related information, such as the time of the failure,
the call with the corresponding burst that has failed, and the cause number.
the call with the corresponding burst that has failed, and the cause number.
3.7. Performing a U Interface Test (NT1-U only)
Use the U INTERFACE test to check the line quality of the U interface to a user. Line
quality is measured in analog way.
quality is measured in analog way.
CHAPTER 3 - PERFORMING A MANUAL TEST
63