Aethra d2000 lite User Manual
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
RestCNF: Number of transmitted and received RESTART CONFIRM
messages.
Reject:
Number of transmitted and received REJECT messages.
Int:
Number of transmitted and received INTERRUPT messages.
IntCNF:
Number of transmitted and received INTERRUPT CONFIRM
messages.
messages.
Diagnost: Number of diagnostic packets transmitted and received.
Invalid:
Number of invalid packets transmitted and received.
Outseq.:
Number of out of sequence packets transmitted and received.
The device has the possibility to send a specific message using
X.25 user data packet on the D channel. The maximum length of
the message is 128 bytes. For further information refer to PC108
for Windows™ User’s manual.
X.25 user data packet on the D channel. The maximum length of
the message is 128 bytes. For further information refer to PC108
for Windows™ User’s manual.
3.10. Testing the X.25 on the B channel
Use an X.25 on the B channel test to verify the operation of the X.25 service and the
throughput on reception and transmission side of the ISDN line, in Vc (virtual circuit)
or pVc (permanent virtual circuit) mode.
throughput on reception and transmission side of the ISDN line, in Vc (virtual circuit)
or pVc (permanent virtual circuit) mode.
3.10.1. Setting Up an X.25 on B channel test
Define the following parameters for an X.25 on B Channel test:
72
CHAPTER 3 - PERFORMING A MANUAL TEST