Aethra avc8500 User Guide
45
Length of Prime DH Number Key (ISDN Only)
The encryption protocol requires the simultaneous exchange of a prime number and an AES private key between terminals.
For H.320 calls you can choose between two prime number lengths:
The encryption protocol requires the simultaneous exchange of a prime number and an AES private key between terminals.
For H.320 calls you can choose between two prime number lengths:
• High Security (length 1024 bits)
• Very High Security (length 1536 bits)
Note
For IP calls, the Codec always uses the High Security option with a 1024-bit length.
Most common video communication terminals normally use the High Security prime number length and the 128-bit AES
private key.
Licences
From the Home Page select:
1. SETTINGS
2. INSTALLATION
3. LICENCES
2. INSTALLATION
3. LICENCES
This page is dedicated to supplementary functions not offered by default. In order to obtain information on the activation of
these functions, please contact your codec supplier.
To insert a licence key by means of the remote control:
To insert a licence key by means of the remote control:
1. Enter the “licence” icon.
2. Press the “Enable Licence” icon.
2. Press the “Enable Licence” icon.
Possible options with licence keys, on different codecs:
a. ISDN connections up to 768Kbps
b. PRI
connections
c. NIC(X.21,V.35, RS.449, RS.530, RS.366) connections
d. G.703
connections
e. MCU
Terminal Settings
From the Home Page, select:
1. SETTINGS
2. INSTALLATION
3. TERMINAL
2. INSTALLATION
3. TERMINAL
SETTINGS
In this section you can configure terminal settings for various network interfaces. For each interface it is possible to set, if
present:
present:
•
•
•
•
The maximum data “Rate” for a call (excluding NIC).
Audio coding
Audio coding
Enable/disable G.722.1 and MP4 AAC-LD coding
Video coding
Enable/disable H.264 coding
Channels
Video coding
Enable/disable H.264 coding
Channels
Determine if channels are to be bonded or not (ISDN only)
Note
With audio and video encoder/decoder settings set to <Auto> the codec choose the encoder/decoder based on the
connection bit rate.
DualVideo H.239 and DuoVideo
TM
can also be enabled/disabled.