Aethra avc8500 User Guide
62
How to start a multiconference
To establish a multiconference:
1. From the Home Page, select the VIDEO icon, or press the “Call” key on the remote control.
You will enter the Audio-Video calls page.
2. Choose desired MultiConference type: MCU IP, MCU ISDN, MCU (mixed mode).
3. Chose the desired rate and number of participants.
3. Chose the desired rate and number of participants.
4. If the MCU has not been configured, it is possible to enter the configuration menu previously described by selecting
the CONFIGURE MCU icon and pressing OK.
5. If the MCU has already been configured, go to the “Active Conference” icon and press OK to start the
multiconference. The same can be obtained by pressing the “CALL” key on the remote control.
6. Local video will be displayed at full screen.
7. To add participants, press the remote control “CALL” key
8. To disconnect participants, press the remote control “DISCONNECT” key.
7. To add participants, press the remote control “CALL” key
8. To disconnect participants, press the remote control “DISCONNECT” key.
H.243 function
From the fullscreen page of MCU manager or a participant terminal is possible to get MCU control, conforming to H.243
From the fullscreen page of MCU manager or a participant terminal is possible to get MCU control, conforming to H.243
protocol, by pressing the BLUE key.
A page will appear, where is possible to:
A page will appear, where is possible to:
•
Request Chair control
Close conference
•
Send local on air
•
For each terminal in the list
Information: connected users
See
Send on air
Disconnect
Remote terminals disposition and visualization
“Terminals disposition” icon
“Video Zoom +” icon
“Video Zoom -” icon