Aethra d2001 nx User Manual
USER’S MANUAL
ISDN TESTER AND ANALYZER D2001
NX
Note that the next line changes from “MANUAL TESTS” to
“SETUP & START MONITOR”.
“SETUP & START MONITOR”.
3
Select SETUP & START MONITOR and open the
SETUP: MONITOR screen.
SETUP: MONITOR screen.
ISDN POTS
Use the functions in this screen to remove superfluous messages from the monitored
traffic. These messages will no longer be available during analysis.
traffic. These messages will no longer be available during analysis.
Capture layer: Choose the layer to be captured in the monitor test.
Capture TEI: Capture specific TEI numbers. You can also use this filter to define one
single TEI that needs to be monitored.
single TEI that needs to be monitored.
Capture SAPI: Capture messages with specific SAPI values.
Capture Msg
⇒ TE: Capture specific messages that are sent to the TE.
Capture Msg
⇒ NT: Capture specific messages that are sent to the network.
Buffer Mode: Choose whether monitoring should stop when the trace buffer is full or
older data should be overwritten.
older data should be overwritten.
Protocol: Choose le local signalling protocol.
CHAPTER 5 - USING THE INSTRUMENT FOR MONITORING
75