Aethra d2001 nx User Manual
USER’S MANUAL
ISDN TESTER AND ANALYZER D2001
NX
5
Executes the selected action by moving to the first line.
The supplementary services supported by the instrument
are listed in the specifications contained in Chapter 11
The supplementary services supported by the instrument
are listed in the specifications contained in Chapter 11
6
Display the result page for the invoked service.
3.5. Performing a Tone Generator test (AB2001N
option)
By the use of this test the device works as generator of sinusoidal signals with phonic
band frequency included between 300 - 3400 Hz.
band frequency included between 300 - 3400 Hz.
The test allows to send on line a single tone or to carry out a scansion of the band
both, in manual and automatic mode.
both, in manual and automatic mode.
The level value is definable by the user as well as the scanning time and the delta
frequency in Hz.
frequency in Hz.
Used in couple with a remote receiver it is possible to check for instance, the correct
opening and transparency of the audio channel in case of conversion into digital
lines, or it is possible to check the quality of the band considering parameters such as
distortion and line attenuation.
opening and transparency of the audio channel in case of conversion into digital
lines, or it is possible to check the quality of the band considering parameters such as
distortion and line attenuation.
3.5.1. Setting up a Tone Generator test
Define the following parameters for a Tone Generator test:
Called number: Enter the phone number of the called party.
Freq start (Hz): Insert the initial frequency value (range from 300 to 3400). If the
value is different from Freq.stop, the device performs a scansion of frequencies
included between the two values.
value is different from Freq.stop, the device performs a scansion of frequencies
included between the two values.
CHAPTER 3 - PERFORMING A MANUAL TEST
47