Manualsbrain.com
  1. Manuals
  2. Brands
  3. Aethra
  4. avc500
  5. User Guide

Aethra avc500 User Guide

Download
Page of 97
 
 
Audio-video calls 
From the Home Page, select the VIDEO icon. The same function can be achieved by pressing the CALL key on the remote 
control. 
You will enter the following page: 
 
To complete the video call, follow these steps: 
1. 
Select the call type from the dropdown menu (ISDN, IP, SIP, NIC, MCU, MCU ISDN, MCU IP). 
2.  ISDN only: check or uncheck the “56K” box for multiple rates of 56Kbps or 64Kbps. 
3.  Select the call rate from the drop-down menu . 
 
! 
To select an option from a drop-down menu, it is necessary to go to the menu itself, press OK, select the 
desired option by means of the remote control arrows and press OK. 
 
4.  Enter the number or user alias (the H.323 Name from the “H.323 Settings” menu) you want to call using either the 
alphanumeric keys on the remote control or the virtual keypad. 
 
! 
1.  A virtual keypad can be activated for situations where you need to enter text (e.g. names for the phonebook 
or aliases for calls). 
2.  To activate it, set the remote control cursor in the box where you want to enter  text and press OK. 
3.  Select the desired letter by moving the cursor over it, and pressing OK. 
4.  To close the virtual keypad, select the ESC key and press OK 
 
5. 
Move to the CALL icon and press OK to make the call. The same function can be achieved by pressing the 
“CALL “ key on the remote control.  
6. 
To end the call, use the DISCONNECT remote control key; if configured, the system will ask you to confirm 
disconnection. 
 
To Reselect an Incoming or Outgoing Call 
Incoming calls are indicated with a red arrow while outgoing ones are indicated with a green arrow; a cyclic buffer of 60 
numbers is available to store calls. 
To reselect a called number press the CALL remote control key twice. A list will appear, and numbers can be selected and 
modified
.
 
 
TCS-4 Mode Video Call 
The TCS-4 mode is an H.320 call (ISDN) to a gateway which is able to transcode H.320 (ISDN)/H.323 (IP). The format for 
number entry is: 
“ISDN number of gateway” followed by “#” followed by “H.323 number (E.164) of the terminal to be called ”. 
 
24