Aethra avc500 User Guide
Plasma
Select plasma, type of monitor and viewing modality.
Note
Select plasma, type of monitor and viewing modality.
Note
Following instructions refer to “Pioneer” monitors.
!
Please carefully check XGA, Y/C and RS232C/DEBUG (null modem cable) connections between plasma and
System.
• In the “Type” field, set the plasma model.
• In the “Number of monitors” field, select the number of connected plasma monitors.
• In the “Mode” field, select the default viewing mode from the pop-up menu.
!
First time “Plasma type” is selected (usually factory done), a particular operations sequence must be followed:
1. Do not connect the system and the monitor by means of serial cable.
2. Select plasma type.
3. Once completed all initializations, switch off the system, connect the system and the monitor by means of
serial cable, switch on the system: now is ready.
Viewing modes
Different viewing modes may change depending on used monitor characteristics .
Following viewing modes with corresponding short explanations refer to Pioneer systems.
1) Automatic MultiScreen
2) Fixed MultiScreen
3) Automatic
2) Fixed MultiScreen
3) Automatic
BigLittleScreen
40