Aethra avc500 User Guide

 

 

IP configuration “Wireless” (Optional) 
In this menu, you can enable automatic IP configuration, or enter the following data manually: 

•  IP address; 

•  Subnet mask; 

•  Gateway IP address; 

•  DNS server IP address corresponding to a wireless network. 

 

 
By selecting ADVANCED, you can enter a page to set: 
SSID: wireless network identification. 
MODE: 

Ad-Hoc: all terminals in the network communicate with each other, and not with a dedicated access point. 
Managed: all terminals present in the network communicate with an access point.  
ENCRIPTION MODE: enable/disable encryption and allow user to set the desired key length. 
ACTIVE KEY: select one of four alternative keys. 
 

By selecting the “BANDWIDTH” icon it is possible to enable and set maximum bandwidth usage limits (in Kbps). These limits 
can be different for transmission and reception, a very useful feature on ADSL networks. 
 

This manual contains a section on “Recommended Wireless Network Interface Cards”. 
 

This section contains the configuration options necessary to use the system with the H.323 protocol: 

•  Name H.323: H.323 ID (the name used by the terminal for registration with the gatekeeper) 

•  Number H.323: E.164 identifying number used by the terminal for registration with the gatekeeper  

•  Gatekeeper use and address 

Gatekeeper automatic IP address 
Gatekeeper static IP address 

Advanced: Automatic registration to Gatekeeper: allows the user to change registration timings 

•  Using NetMeeting: If a T.120 connection is available, a data conference using NetMeeting can be started by 

entering the IP address of the application host server. To enable this function: 

1.  Check the box next to “Use NetMeeting”  

2.  Enter a server IP address where the application is hosted.  
 

 

56