Viewsonic PJL6243 User Guide

20

ViewSonic PJL6243

20

Power off? disappears after 4 seconds.

Press the ON/STAND-BY button on the top control 

or on the remote control, and 

Power off? appears 

on the screen.

Press the ON/STAND-BY button again to turn off 

the projector. The POWER indicator lights red and 

the cooling fans stop (default setting), and you can 

unplug the AC power cord.

If 

L1 is selected in Fan menu (p.55), the POWER 

indicator starts to blink red and the cooling fans keep 

running for about 60 seconds, then the POWER 

indicator lights red and the cooling fans stop. You 

can unplug the AC power cord even if the cooling 

fans are still running.



  • When the Direct on function is set to 

On, 

the projector will be turned on automatically 

by connecting the AC power cord to an AC 

outlet (p.49).

  • The running speed of cooling fans is 

changed according to the temperature inside 

the projector.

  • Do not put the projector in a case before the 

projector is cooled enough.

  • If the WARNING indicator blinks or lights red, 

see “WARNING indicator” on page 58.

  • While the POWER indicator is blinking, the 

lamp is being cooled down and the projector 

cannot be turned on. Wait until the POWER 

indicator stops blinking to turn on the 

projector again.

  •  The projector can be turned on after the 

POWER indicator lights red.

  •  When 

L2 is selected in Fan menu (p.55) and 

the projector is turned on right after it turns 

off, it takes a while to start projecting.



When using the Direct Off function, you can not 

restart the projector immediately after the power 

is disconnected. If the external power supply is 

suddenly cut off, the fans stop immediately. The 

lamp remains high temperature and needs to be 

cooled.

You can disconnect the power cord from the wall outlet 

or turn off the breaker even during projection without 

pressing the ON/STAND-BY button.

Direct Off Function