Viewsonic CD4620 User Manual

 CD4620 

30 

 

 

 

* : INPUT RGB3,4 only 

y

  Selects to decision of input signal about below timings, 1024x768, 1280x768 and 1360x768. 

y

  AUTO: Determines the resolution automatically. 

y

  1024x768: Determines the resolution as 1024x768 

y

  1280x768: Determines the resolution as 1280x768 

y

  1360x768: Determines the resolution as 1360x768 

y

  The setting you select becomes effective when POWER is turned OFF and ON again. 

* : INPUT RGB1,2(HDMI INPUT MODE-HD), VIDEO<S>, VIDEO only 

y

  Selects a level of black expansion from “OFF”, “MIDDLE” and “HIGH.” 

y

  In case of go under the black cut-off level, please adjust the “Black level” in moderation on OSD menu. 

y

  Selects a display gamma. 

y

 2.2 

y

 2.4 

y

 S gamma 

y

 Native 

y

  NOTE: sRGB picture mode is standard and cannot be changed. 

* : INPUT DVD/HD, VIDEO<S>, VIDEO only 

y

  Changes the display area of the image. 

y

  OVERSCAN: Set to display area about 95% 

y

  UNDERSCAN: Set to display area about 100% 

* : INPUT DVD/HD, VIDEO<S>, VIDEO only 

y

  Selects IP (Interlace to Progressive) converter function. 

y

  PROGRESSIVE: Enable the IP function, to convert interlace signal to progressive. Normally use this setting. 

y

  INTERLACE*: Disable the IP function. 

y

  *NOTE: This mode is better suited for motion pictures, but it increases chance of image retention. 

* : INPUT DVD/HD, VIDEO<S>, VIDEO only 

y

  Selects Film mode function. 

y

  AUTO: Enable the Film mode function. This mode is better suited for movies, which is converted 24 Frames/sec source to 

DVD Video. We recommend to select “PROGRESSIVE” in “SCAN CONVERSION”. 

y

  OFF: Disable the Film mode function. This mode is better suited for Broadcasting or VCR source. 

y

  Selects the operation mode of the wireless remote controller when multiple CD4620 monitors are connected via RS-232C. 

y

  The item in this menu will become effective by pressing “SET” button on the selected item. 

y

  NORMAL: The monitor will be controlled normally by wireless remote controller. 

y

  PRIMARY: The first CD4620 monitor of those multi-connected via RS-232C is designated as PRIMARY. 

y

  SECONDARY: CD4620 monitors other than the first one multi-connected via RS-232C are designated as SECONDARY. 

y

  LOCK: Disable the monitor control by infrared wireless remote controller. 

y

  Keep pressing “DISPLAY” button during 5 sec or more, this setting will return to “NORMAL”.