Vidikron VL-26HD User Guide

Use the controls in the Picture Adjust menu to calibrate your DView for optimum picture 
quality.

The DView has been designed to incorporate setup and calibration standards established by 
the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, 
industry-recognized standards for optimal video performance and has implemented a 
training program for technicians and installers to use these standards to obtain optimal 
picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that 
setup and calibration be performed by an ISF-certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input 
separately. 

Although it may be possible to obtain satisfactory picture quality using the naked eye and 
regular program material, Vidikron recommends using the following calibration tools for 
best results: 

• External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test 

DVD or equivalent.

• A blue filter (provided with many test DVDs), for color level and tint adjustments.

Connect your test pattern source to the input that you are calibrating and proceed as follows. 
Perform the adjustments in the order listed here.

➤

When you change a picture quality setting, save the change to a preset 
afterwards. Otherwise, the change will be lost when a different input is 
selected. (Picture quality settings are saved for each input and resolution 
separately.) For information about saving settings, refer to Save 
Settings (not available for RGB input) on page 33.