Alesis micron Reference Manual

 

Choose an effect to apply to the setup, or turn the control knob all 
the way to the left (or double-click the control knob) to bypass the 
effects. 
 
If you do choose an effect, the editable parameters associated with 
that effect will be shown in subsequent screens. 
 
Each part and beat has an “FX mix” parameter to control how 
much of its sound is passed through the master effects section.  If 
a part or beat is set to “100% dry,” it is unaffected by the setup’s 
effects. 
 

Choose clear to remove all of the parts and beats from the setup 
but to retain the setup’s name.   
 

Since setups are listed alphabetically, creative naming can help you 
move smoothly from one setup to another. 
 
Turn the control knob to select a position (1 – 14) to edit.  Then 
press the control knob to edit that position.  Edit either by turning 
the control knob or pressing notes on the keyboard.   
 
 
 
 
 
 
Press a key twice to toggle between upper and lower case. 
 

To insert a space in the name, navigate to the position at 
which you want to add the space.  Hold down the control 
knob and turn it clockwise.  

 

To delete a character, navigate past it, hold down the control 
knob, and turn it counterclockwise.  
 
In both cases, imagine that you are “dragging” the name 
around.