Alesis micron Reference Manual

 

 
2. 

.  The setup’s existing part is duplicated, resulting in a new 

part.  This new part uses the program but retains the level, effects 
mix, and other information of the setup’s original part. See the 
sidebar for a description of how the parts’ letter assignments are 
affected. 
 
3. 

.  The setup’s existing part is split in two at a particular 

key.   
 
The Micron prompts for a note on the keyboard at which to 
execute the split.  The program is then sent to the lower part of 
the split.  Every note below the one you select will use this new 
program, down to that part’s low key setting.  Every note including 
and higher than the note you select will use the setup’s existing part.  
 
The new part is assigned the letter of the part that was split low.  
For example, if the setup contains parts A, B, C, and D, and part B 
is the part that is split, then the newly added part will become part 
B, and the original part will become part C.  All later parts’ letters 
are incremented by one.   
 
To select the split point, turn the control knob or play a key.  You 
can use the [octave] buttons if your desired split point is outside 
of the current key range.   
 
4. 

.  The setup’s existing part is split in two at a 

particular key. 
 
As with the split low option, the Micron prompts for a note on the 
keyboard at which to execute the split.  The program is then sent 
to the upper part of the split.  Every note above the one you select 
will use this new program, up to that part’s high key setting.  Every 
note including and lower than the note you select will use the setup’s 
existing part.  
 
To select the split point, turn the control knob or play a key.  You 
can use the [octave] buttons if your desired split point is outside 
of the current key range.  
 
5. 

.  The program is added as a brand new part across the 

entire keyboard range.  All other part parameters are set to their 
default values as well.