GE JVM1650BH User Guide
Probe has been
• Insert the probe properly into the
forgotten or may not be
oven wall outlet.
inserted properly into
oven outlet.
oven outlet.
The probe is defective.
• Replace the probe.
42
If Something Goes Wrong
Before You Call For Service
Oven will not
start
start
Floor of the oven is
warm, even when
the oven has not
been used
warm, even when
the oven has not
been used
“LOCKED” appears
on display
on display
You hear an
unusual, low-tone
beep
unusual, low-tone
beep
“SENSOR ERROR”
appears on display
appears on display
Food amount too
large for Sensor
Reheat
large for Sensor
Reheat
“BAD PROBE” or
“PLEASE INSERT
PROBE” appears
on display
“PLEASE INSERT
PROBE” appears
on display
Problem
Possible Cause
What to Do
A fuse in your home
• Replace fuse or reset circuit breaker.
may be blown or the
circuit breaker tripped.
circuit breaker tripped.
Power surge.
• Unplug the microwave oven, then plug
it back in.
Plug not fully inserted
• Make sure the 3-prong plug on the
into wall outlet.
oven is fully inserted into wall outlet.
Door not securely closed. •
Open the door and close securely.
Heat from the cooktop
• This is normal.
light may make the oven
floor get warm.
floor get warm.
The control has been
• Press and hold CLEAR/OFF for
locked.
about 3 seconds to unlock the control.
You have tried to start
• Start over and enter a valid time
the Reminder without
of day.
a valid time of day.
You have tried to change •
Many of the oven’s features are preset
the power level when it is
and cannot be changed.
not allowed.
When using a Sensor
• Do not open door until steam is
feature, the door was
sensed and time is shown counting
opened before steam
down on display.
could be detected.
Steam not detected
• Use Time Cook to heat for more time.
in maximum amount
of time.
of time.
Sensor Reheat is for
• Use Time Cook for large amounts
single servings of
of food.
recommended foods.