Lexmark P6250 Quick Setup Guide

Note: Contents may vary.

Lift the paper support and 
extend the paper exit tray.

Load plain paper.

*21B0070*

• Use only the power supply provided 

with this product or the manufacturer's 
authorized replacement power supply.

• Connect the power supply cord to an 

electrical outlet that is near the product 
and easily accessible.

• Refer service or repairs, other than 

those described in the user 
documentation, to a professional 
service person.

CAUTION: Do not use the fax feature 
during a lightning storm. Do not set up this 
product or make any electrical or cabling 
connections, such as the power supply 
cord or telephone, during a lightning 
storm.

Open the cartridge lids, insert the cartridges, and 
snap the lids closed.

Left:

Right:

Lower the paper feed guard, 
squeeze the paper guide, and 
slide it to the left edge of the paper.

Connect the power cord.

Make sure the 
Power light is 
on.

Close the scanner unit.

Press the right arrow button 
to scroll to your language, 
and then press Select

Press Select to print an 
alignment page.

You may discard the 
alignment page after it 
prints.

Place the stored cartridge 
in the storage area of your 
All-In-One.

Keep a new or 
partially used 
cartridge in the 
print cartridge 
storage unit:

Remove the sticker and tape from the print cartridges.

Warning: Do not touch the copper contact area on 
the back or the metal print cartridge nozzles on the 
bottom.

Remove the photo 
cartridge from the 
print cartridge storage 
unit.

Lift the scanner unit.