Vivitar 40 User Guide
7. PC/Web Camera Functionality
PC users can connect the camera to their PC and use
it as a PC camera.
1.
First, make sure you have installed the driver.
2.
Turn on the camera. Press and hold the Select button until
the LCD panel displays:
.
3.
Keep pressing the Select button and then connect the
USB cable to Vivicam and to your PC's USB port.
USB cable to Vivicam and to your PC's USB port.
4.
Release the Select button after you hear a beep from
camera which means the PC cam function is ready.
camera which means the PC cam function is ready.
5. Refer to the instructions for your video software about using
a PC camera. Windows XP user may use Movie Maker.
(Select " Vivicam 10&20 " if your software has video
capture source list.)
?
lmportant Note:
1.You must continue to press and hold the Select
button while the the camera is connecting to your PC
Wait for the camera confirmation beep which signals
that the PC cam function is ready.
Wait for the camera confirmation beep which signals
that the PC cam function is ready.
2. If you wish to switch back to USB mass storage mode
un-plug the USB Cable, turn the camera off and then
on again. Then, re-connect to PC without pressing the
select button.
on again. Then, re-connect to PC without pressing the
select button.