Sony DSC-F717 Operating Guide
113
Ad
d
d
iti
o
n
a
l in
fo
fo
rma
tio
n
Precautions
On cleaning
Cleaning the LCD screen
Wipe the screen surface with an LCD
cleaning kit (not supplied) to remove
fingerprints, dust, etc.
cleaning kit (not supplied) to remove
fingerprints, dust, etc.
Cleaning the lens
Wipe the lens with a soft cloth to remove
fingerprints, dust, etc.
fingerprints, dust, etc.
Cleaning the camera surface
Clean the camera surface with a soft cloth
slightly moistened with water, then wipe
the surface dry. Do not use any type of
solvent such as thinner, alcohol or benzine
as this may damage the finish or the casing.
slightly moistened with water, then wipe
the surface dry. Do not use any type of
solvent such as thinner, alcohol or benzine
as this may damage the finish or the casing.
After using your camera at the
seashore or other dusty locations
seashore or other dusty locations
Clean your camera carefully. Otherwise,
the salty air may corrode the metal fittings
or dust may enter the inside of your camera,
causing a malfunction.
the salty air may corrode the metal fittings
or dust may enter the inside of your camera,
causing a malfunction.
Note on operating temperature
Your camera is designed for use between
the temperatures of 0°C and 40°C (32
the temperatures of 0°C and 40°C (32
°
F
and 104
°
F). Shooting in extremely cold or
hot places that exceed this range is not
recommended.
recommended.
On moisture condensation
If the camera is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense inside
or outside the camera. Should this occur, the
camera will not operate properly.
to a warm location, or is placed in a very
damp room, moisture may condense inside
or outside the camera. Should this occur, the
camera will not operate properly.
Moisture condensation occurs easily
when:
when:
• The camera is brought from a cold
location such as a ski slope into a warmly
heated room.
heated room.
• The camera is taken from an air-
conditioned room or car interior to the hot
outdoors, etc.
outdoors, etc.
How to prevent moisture
condensation
condensation
When bringing the camera from a cold
place to a warm place, seal the camera in a
plastic bag and allow it to adapt to
conditions at the new location over a period
of time (about an hour).
place to a warm place, seal the camera in a
plastic bag and allow it to adapt to
conditions at the new location over a period
of time (about an hour).
If moisture condensation occurs
Turn off the camera and wait about an hour
for the moisture to evaporate. Note that if
you attempt to shoot with moisture
remaining inside the lens, you will be
unable to record clear images.
for the moisture to evaporate. Note that if
you attempt to shoot with moisture
remaining inside the lens, you will be
unable to record clear images.
On internal rechargeable button
battery
battery
This camera has an internal rechargeable
button battery for maintaining the date and
time and other settings regardless of
whether the power is on or off.
This rechargeable button battery is
continually charged as long as you are using
the camera. However, if you use the camera
for only short periods it discharges
gradually, and if you do not use the camera
at all for about one month it becomes
completely discharged. In this case, be sure
to charge this rechargeable button battery
before using the camera.
However, even if this rechargeable button
battery is not charged, you can still use the
camera as long as you do not record the date
and time.
button battery for maintaining the date and
time and other settings regardless of
whether the power is on or off.
This rechargeable button battery is
continually charged as long as you are using
the camera. However, if you use the camera
for only short periods it discharges
gradually, and if you do not use the camera
at all for about one month it becomes
completely discharged. In this case, be sure
to charge this rechargeable button battery
before using the camera.
However, even if this rechargeable button
battery is not charged, you can still use the
camera as long as you do not record the date
and time.
Charging method
Connect the camera to a wall outlet (mains)
using the AC power adaptor, or install a
charged battery pack, and leave the camera
for 24 hours or more with the power off.
using the AC power adaptor, or install a
charged battery pack, and leave the camera
for 24 hours or more with the power off.