Sony DSC-P100 User Guide

Page of 128
11
G
e
tti
n
g
 st
ar
te
d
Charging the battery pack
,
Open the battery/“Memory 
Stick” cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when 
charging the battery pack (page 15).
Your camera operates with the 
“InfoLITHIUM” NP-FR1 battery pack (R type) 
(supplied). You can use only R type battery 
pack (page 117).
,
Install the battery pack, then 
close the battery/“Memory 
Stick” cover.
Make sure the battery pack is firmly 
inserted all the way, then close the cover.
Battery insertion slot
Insert the battery pack so 
that the tip of the v 
marks on the side of the 
battery pack face the tip 
of the v mark on the 
battery insertion slot.
The battery pack is easily inserted by pushing 
the battery eject lever at the front of the battery 
compartment toward the front of the camera.
,
Open the DC IN jack cover and 
connect the AC Adaptor 
(supplied) to the DC IN jack of 
your camera.
Open the cover in the arrow direction as 
illustrated above. Connect the DC plug with 
the v mark facing the LCD screen side.
Do not short the DC plug of the AC Adaptor 
with a metallic object, as this may cause 
malfunction.
Clean the DC plug of the AC Adaptor with a 
dry cotton bud. Do not use the dirty plug. Use 
of the dirty plug may not properly charge the 
battery pack.
1
2
Battery eject lever
Surface with the “InfoLITHIUM” logo
3
DC plug
AC Adaptor
DC IN jack cover
Getting started