Sony DSC-P8 User Guide

Page of 116
87
Tr
oub
le
s
hoot
in
g
Shooting still images/movies
The battery remaining 
indicator is incorrect, or 
sufficient battery 
remaining indicator is 
displayed but the power 
runs out soon.
• You have used the camera for a long time in an 
extremely hot or an extremely cold location. 
• A deviation has occurred in the remaining 
battery time.
• The battery pack is discharged. 
• The battery pack is dead (page 109). 
p Fully discharge and then charge the battery pack so that the 
battery remaining indicator functions correctly (page 11).
p Install a charged battery pack (page 10).
p Replace the battery pack with a new one. 
The battery pack runs 
down too quickly.
• You are shooting/viewing images in an 
extremely cold location.
• The DC plug is dirty so the battery pack is not 
charged enough.
• The battery pack is dead (page 109).
p Clean the pins of the AC Adaptor with a cotton swab, etc., and 
charge the battery pack (page 10).
p Replace the battery pack with a new one.
You cannot turn on the 
camera.
• The battery pack is not installed correctly.
• The AC Adaptor is disconnected. 
• The battery pack is discharged. 
• The battery pack is dead (page 109).
p Install the battery pack correctly (page 10).
p Properly connect the AC Adaptor (page 13).
p Install a charged battery pack (page 10).
p Replace the battery pack with a new one.
The power turns off 
suddenly. 
• If you do not operate the camera for about 90 
seconds while the power is on, the camera turns 
off automatically to prevent wearing down the 
battery pack (when [Power Save] is [Off] after 
three minutes) (page 14).
• The battery pack is discharged. 
p Turn on the camera again (page 14).
p Install a charged battery pack (page 10).
Symptom
Cause
Solution
The LCD screen is not 
turned on even when the 
power is turned on.
• The power was turned off with the LCD screen 
turned off the last time you used the camera.
p Turn on the LCD screen (page 27).
The subject is not visible 
on the LCD screen.
• The mode dial is set to 
 or SET UP.
p Set it to other modes (pages 20 and 67).
Symptom
Cause
Solution