Sony DSC-S75 Manual
60
The number of Clip Motion frames
that you can record on a “Memory
Stick” (8 MB or 16 MB)*
that you can record on a “Memory
Stick” (8 MB or 16 MB)*
*
The numbers in the parentheses indicate
the number of images or the amount of
recordable time on a “Memory Stick” (16
MB).
the number of images or the amount of
recordable time on a “Memory Stick” (16
MB).
∗∗
When recording 10 frames per Clip
Motion file
Motion file
Notes
•
You cannot change the image size partway
through a Clip Motion recording.
through a Clip Motion recording.
•
Reading and writing data take more time
than normal image recording.
than normal image recording.
•
Due to the limitations of the GIF format,
the number of colors for Clip Motion
images is reduced to 256 colors or less.
Therefore, the picture quality may
deteriorate for some images.
the number of colors for Clip Motion
images is reduced to 256 colors or less.
Therefore, the picture quality may
deteriorate for some images.
•
The file size is reduced in MOBILE mode,
so the picture quality deteriorates.
so the picture quality deteriorates.
•
GIF files not created on this camera may
not be displayed correctly.
not be displayed correctly.
•
All the frame images are immediately
recorded on the “Memory Stick” if the
mode dial is switched or the power is
turned off.
recorded on the “Memory Stick” if the
mode dial is switched or the power is
turned off.
Image size
Number of images
NORMAL
(160×120)
Approx. 40 (80)**
MOBILE
(80×72)
Approx. 350 (450)
Setting the distance
to the subject
to the subject
Mode dial:
/S/A/M/SCN/
Normally the focus is automatically
adjusted. This function is useful when
the auto focus does not work well such
as in dark places.
adjusted. This function is useful when
the auto focus does not work well such
as in dark places.
1
Set the mode dial to
, S, A,
M, SCN or
.
2
Press FOCUS.
The focus is fixed and the
9
(manual focus) indicator appears.
3
Turn the jog dial to select the
desired focus setting.
desired focus setting.
You can select from 15 focus
settings (unit: m) including the
settings (unit: m) including the
9
position:
0.1, 0.2, 0.3, 0.5, 0.8, 1.0, 1.5, 2.0,
3.0, 5.0, 7.0, 10.0, 15.0 and
0.1, 0.2, 0.3, 0.5, 0.8, 1.0, 1.5, 2.0,
3.0, 5.0, 7.0, 10.0, 15.0 and
∞
(infinity)
To reactivate auto focusing
Press FOCUS again and the focal point
information disappears.
information disappears.
Notes
•
Focal point information may not
completely show the correct distance. Use
the information as a guide.
completely show the correct distance. Use
the information as a guide.
•
The focus preset cannot be set when
attaching a conversion lens.
attaching a conversion lens.
•
Focusing error increases if the lens is
pointed up or down.
pointed up or down.
•
If you shoot a subject within 0.2 m
(7 7/8 inches) while the zoom is set to the
T side, you cannot get a clear focus. In
such cases, the focal point information
flashes. Press the zoom W button until the
indicator stops flashing.
(7 7/8 inches) while the zoom is set to the
T side, you cannot get a clear focus. In
such cases, the focal point information
flashes. Press the zoom W button until the
indicator stops flashing.
2
1
3