Sony DSC-U40 Manual

Page of 92
67
Tr
ou
bl
e
s
hoo
ting
Troubleshooting
If you experience trouble with your camera, 
try the following solutions.
1
First check the items on the tables below. 
If code “C:
ss
:
ss
” is displayed 
on the LCD screen, the self-
diagnosis display function is 
working (page 77).
2
Should your camera still not work 
properly, press the RESET button on the 
bottom of the camera using a fine-tipped 
object, then turn on the power again. (All 
the settings including date and time are 
cleared.)
3
Should your camera still not work 
properly, consult your Sony dealer or 
local authorized Sony service facility. 
Batteries and power
RESET button
Symptom
Cause
Solution
The battery remaining 
indicator is incorrect, or 
sufficient battery remaining 
indicator is displayed but 
the power runs out soon.
• You have used the camera in an extremely cold 
location. 
• The batteries are discharged. 
• The battery contacts or the terminals on 
the 
battery/“
Memory Stick Duo
” cover
 are dirty.
• The batteries are exhibiting the “memory effect” 
• The batteries are dead (page 84). 
p Install charged batteries (page 10).
p Wipe any dirt off from them with a dry cloth (page 11).
p To restore the batteries to their original condition, use them until 
they are fully drained before recharging them. 
p Replace the batteries with new ones.
The battery life is short.
• You are shooting/viewing images in an 
extremely cold location.
• The batteries are not charged enough.
• The batteries are dead (page 84).
p Charge the batteries (page 10).
p Replace the batteries with new ones.
Troubleshooting