Sony DSC-U60 User Guide

Page of 88
74
Precautions
Do not leave the camera in the 
following places
• In extremely hot place, such as in a car 
parked in the sun. The camera body may 
become deformed or this may cause a 
malfunction.
• Under direct sunlight or near a heater. 
The camera body may become deformed 
or this may cause a malfunction.
• On rocking vibration.
• Near strong magnetic place.
Notes on use
• Do not open the waterproof cover 
underwater, in places exposed to water, at 
the seashore or other places with lots of 
sand dust. Water or sand entering the 
inside of the camera may cause a 
malfunction or irreparable damage.
• When not using the camera for a long 
period of time, turn on the power once 
every so often.
Shoot and play back images or otherwise 
operate the camera for about 3 minutes to 
ensure proper operation.
• Do not connect the battery charger to an 
electronic type transformer or other 
overseas travel equipment. This may 
cause the battery charger to become 
excessively hot or cause a malfunction.
On charging the batteries
• To protect the batteries, remove the 
batteries from the battery charger within 
24 hours after charging is completed.
• Charging the batteries in an ambient 
temperature of 10°C to 30°C is 
recommended.
On cleaning
Cleaning the LCD screen
Wipe the screen surface with an LCD 
cleaning kit (not supplied) to remove 
fingerprints, dust, etc. 
Cleaning the lens
Wipe the lens surface with a soft cloth to 
remove fingerprints, dust, etc.
Cleaning the camera surface
Clean the camera surface with a soft cloth 
slightly moistened with water, then wipe 
the surface with a dry cloth. Do not use the 
following as this may damage the finish or 
the casing.
Thinner
Benzine
Alcohol
Diposable cloth
Volatile insecticide
Contact with rubber or vinyl for a long time 
After getting the camera wet
• Wipe away any water droplets on the 
camera body with a clean, dry, soft cloth.
• Note that water remaining in the gaps on 
the camera body may get your clothes or 
the inside of your bag wet.
• In cold places, water droplets may freeze 
on the camera body. Note that using the 
camera with water droplets frozen on it 
may cause a malfunction.
When sand, dirt or seawater 
adhere to the camera
If salt or other dirt is left encrusted on the 
camera, the metal portions may become 
damaged or rusted and result in water leaks. 
Follow the procedure below and clean the 
camera before opening the waterproof 
cover. Use tap water at 30°C or less to wash 
the camera.
1
Leave the camera immersed in a bucket 
or other container filled with fresh water.
Wash the camera by gently moving it back and 
forth to thoroughly remove any dirt, sand and 
salt. Then, let it soak for approximately 
30 minutes. 
Do not rub the lens or the LCD screen when 
they are dirty as this may cause scratches.