Vox mini3 User Guide

Here you can adjust settings for the effects.

For details on each effect, refer to “Effects” (page 12).
9.  EFFECTS knob

This knob enables you to select the effect type and set

the intensity of the effect.

To bypass the effects, rotate the knob all the way to the

left.

10. DELAY/REVERB knob

This knob enables you to select a delay/reverb-type effect

and set the intensity of the effect.

To apply an effect (selected via this knob) to the micro-

phone input, use the DLY/REVERB SEND knob to set the

intensity of the effect.

To turn off the delay/reverb effect applied to the guitar

input, rotate this knob all the way to the left or set the

knob to the minimum position of the "swoosh" of the

corresponding effect type.

11. TAP switch, LED/TUNER LED indicator

This switch enables you to set the time of the DELAY and

REVERB effects. Tap this switch twice to set the time. The

duration between two taps will be used as the time value.

The indicator will flash in sync with the time.

HINT:  To set the time to exactly match the tempo of a

song, press the TAP button several times along

with the song.

NOTE: If you turn off the power to the unit, the value

set by the TAP button will be reset to its initial

value.

To enable the tuner function, press and hold down the

TAP switch for more than one second. All effects will

be bypassed. When the tuner function is turned on, the

TUNER LED indicator will indicate the tuning status.

For more information, please refer to "Using the Tuner"

on page 9.