VTech vt2910 User Guide
26
Programming the Base Unit Ringer
1. Press and hold the MEM/PROG key
1. Press and hold the MEM/PROG key
until the LCD displays
PROGRAM LOCATION _ _.
PROGRAM LOCATION _ _.
2. Press #. LCD displays
?: 1=HANDSET 2=BASE.
3. Press 2. LCD displays
?: 1=LINE 1 2=LINE 2.
4. Press 1 (or 2, depending on which
line you’re programming).
5. Press 1,2,3, or 4. The Base Unit
will generate the tone you’ve
selected. Press any of the other
ringer selections (1,2,3,4) to compare
the different tones.
selected. Press any of the other
ringer selections (1,2,3,4) to compare
the different tones.
6. Once you have selected a ringer
tone, press OFF.
To turn the Base Unit ringer OFF, locate
the L1 RINGER and L2 RINGER ON/OFF
switches, on the right-hand edge (antenna
side) of the Base Unit.
the L1 RINGER and L2 RINGER ON/OFF
switches, on the right-hand edge (antenna
side) of the Base Unit.
NOTE: Adjusting the Base Unit ringer
switches does not affect the Handset
ringer settings.
switches does not affect the Handset
ringer settings.
MEMORY DIALING
Your
VT 2910c can store 20 phone
numbers in memory. Each phone
number can contain up to 20 digits.
number can contain up to 20 digits.
Programming Phone Numbers into
Memory
Memory
1. With the Handset OFF, enter the
telephone number you wish to store.
View the number on the LCD to make
sure you’ve entered it correctly. If
you’ve made a mistake, either press
and hold the CONF/CLEAR key to
erase the entire string of numbers, or
press and hold the INT.COM/DEL key,
which will backspace your entry, one
digit at a time.
View the number on the LCD to make
sure you’ve entered it correctly. If
you’ve made a mistake, either press
and hold the CONF/CLEAR key to
erase the entire string of numbers, or
press and hold the INT.COM/DEL key,
which will backspace your entry, one
digit at a time.
ADVANCED OPERATIONS
2. Press and hold MEM/PROG.
The LCD displays PROGRAM
LOCATION _ _.
LOCATION _ _.
3. Enter a 2-digit memory location (01
- 20). The Handset will emit a
warbled, happy tone to confirm
successful programming.
warbled, happy tone to confirm
successful programming.
If the LCD displays PROGRAMMING
INCOMPLETE,repeat STEPS 1-3.
INCOMPLETE,repeat STEPS 1-3.
Storing a Phone Number from
REDIAL
1. With the Handset OFF, press REDIAL.
REDIAL
1. With the Handset OFF, press REDIAL.
The last phone number you called will
be displayed on the LCD.
be displayed on the LCD.
2. Press and hold MEM/PROG. The
L C D d i s p l a y s P R O G R A M
LOCATION _ _.
LOCATION _ _.
3. Enter a 2-digit memory location (01-
20). The Handset will emit a warbled,
happy tone to confirm successful
programming.
happy tone to confirm successful
programming.
Storing a Pause in a Phone Number
To insert a pause when programming
a phone number into memory, press the
HOLD/PAUSE key at the appropriate
point in the number sequence. A P will
be displayed on the LCD, and is treated
as a stored digit. The pause is
approximately 2 seconds. For a longer
pause, press HOLD/PAUSE two or
more times.
a phone number into memory, press the
HOLD/PAUSE key at the appropriate
point in the number sequence. A P will
be displayed on the LCD, and is treated
as a stored digit. The pause is
approximately 2 seconds. For a longer
pause, press HOLD/PAUSE two or
more times.
For example, to store 9-PAUSE-555-1234
in Memory Location 08:
1. Press 9
2. Press HOLD/PAUSE
3. Enter 5551234
4. Press and hold MEM/PROG
5. Enter 08
in Memory Location 08:
1. Press 9
2. Press HOLD/PAUSE
3. Enter 5551234
4. Press and hold MEM/PROG
5. Enter 08
VT2910C EN MANU
12/16/99, 6:17 AM
26