Vizualogic c-1000 Installation Instruction
Ground
Ground
A/V box +12V
input
(GROUND) BLACK WIRE
Monitor Functions:
1. Switch the monitor to A/V (1)
1. Switch the monitor to A/V (1)
(+12V SWITCH) RED WIRE
No picture will be displayed while driving
Once the car is put in reverse, the screen will
Once the car is put in reverse, the screen will
(+12V REVERSE WIRE) ORANGE WIRE
switch over to A/V (2) to display the camera view.
2. Switch the monitor to A/V (2)
2. Switch the monitor to A/V (2)
Tap/Connect
The monitor will always display the camera view.
LENS
to existing reverse
(Driving forward, or backing up)
wire.
Optional Circuit Diagram
1. Adding a relay so the Monitor will turn on when the car
is in reverse only. The Monitor will turn off when the car
goes out of reverse.
1. Adding a relay so the Monitor will turn on when the car
is in reverse only. The Monitor will turn off when the car
goes out of reverse.
REVERSE LIGHT FOUND
2. Relay wires
AT THE BACK OF THE CAR
a. Connect pin 87 to the 'RED WIRE' from A/V Box.
b. Connect pin 86 to the 'ORANGE WIRE' from A/V box.
c. Connect pin 85 to GROUND
d. Connect pin 70 to the +12V Switch
e. Pin 87a is not used.
b. Connect pin 86 to the 'ORANGE WIRE' from A/V box.
c. Connect pin 85 to GROUND
d. Connect pin 70 to the +12V Switch
e. Pin 87a is not used.
BACKUP MONITOR
AUDIO R
OUTPUT
AUDIO R
2CH A/V CONTROLLER
VIZUALOGIC
AUDIO L
AUDIO R
AUDIO L
INPUT 2
To
Monitor
Monitor
AUDIO L
VIDEO
VIDEO 1
VIDEO 2
INPUT
INPUT
3.5 INCH TFT LCD COLOR VISION
SENSOR
<VOL
VOL>
POWER
MODE
CAMERA
LOCATED IN THE BUMPER
-
+
BATTERY
+12V Ignition
87
87a
85
86
70
Optional Circuit
see bottom for details
A/V box ground
input
Battery
Reverse wire
Ground
+12V Ignition
HindSight
™
System Diagram
99-8019-005 10/03