JVC gz-mg150 User Guide
15
ENGLISH
When Using an SD Card
If you want to record to an SD card, the
following three operations need to be
performed.
following three operations need to be
performed.
Compatible SD cards:
Panasonic, TOSHIBA, and SanDisk. 128 MB
to 4 GB.
Panasonic, TOSHIBA, and SanDisk. 128 MB
to 4 GB.
•
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
that had already been recorded.
•
For video recording, use a high-speed SD
card (at least 10 MB/s).
•
MultiMediaCards are not supported.
Q Insert an SD card
Preparation:
Set the power/mode switch to OFF
Set the power/mode switch to OFF
.
1
Open the SD card cover.
Bottom of the
Camera
Camera
2
Firmly insert the card with its clipped
edge fi rst.
Clipped Edge
3
Close the SD card cover.
8 To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
After the card comes out a little, pull it out.
NOTES
•
Insert and remove the SD card only while
the power is turned off. Otherwise, data on
the card may be corrupted.
the card may be corrupted.
•
Do not touch the terminal on the reverse
side of the label.
R Change the recording medium
The camera is programmed to record on the
built-in hard disk when it is shipped from the
factory. You can change the recording medium
to SD card.
built-in hard disk when it is shipped from the
factory. You can change the recording medium
to SD card.
Set [REC MEDIA FOR VIDEO] and [REC
MEDIA FOR IMAGE] to [SD]. (
MEDIA FOR IMAGE] to [SD]. (
pg. 47,
48)
S Format an SD card when using it for
the fi rst time
This will also ensure stable speeds and
operation when accessing the SD card.
operation when accessing the SD card.
Select [EXECUTE] in [FORMAT SD
CARD] to format the card. (
CARD] to format the card. (
pg. 50)