JVC GZ-MG70 User Manual
48
EN
MasterPage: Heading0_Left
You can change the menu settings to customize
your camera. Access the desired menu screen
by following the steps below, then change the
various settings.
your camera. Access the desired menu screen
by following the steps below, then change the
various settings.
1
Select the operation mode.
For Recording Menus:
Set the power switch to
Set the power switch to
.
For Playback Menus:
Set the power switch to
Set the power switch to
.
2
Select
(video) or
(still image) using the
MODE switch.
3
Press MENU. The menu screen appears.
4
Select the desired sub menu and menu item
with /
and
49.
● To return to the normal screen, press MENU.
● To display the operation guide, press INFO/
when the menu screen is displayed. (The
operation guide is not displayed depending on the
type of the menu.) To remove the operation guide,
press INFO/
operation guide is not displayed depending on the
type of the menu.) To remove the operation guide,
press INFO/
again.
● Even if the menu item is displayed, some item
cannot be set depending on the selected mode
(video/still image, recording/playback). In this
case, sub menu cannot be accessed or setting
cannot be changed.
(video/still image, recording/playback). In this
case, sub menu cannot be accessed or setting
cannot be changed.
[ ] = Factory-preset
BASIC SETTING
EXECUTE: Resets all settings to the factory-
preset.
[CANCEL]: Returns to the menu screen without
executing reset.
preset.
[CANCEL]: Returns to the menu screen without
executing reset.
OFF: Disables the function.
[ON]: Activates demonstration mode and shows
various features on the display.
Demonstration starts in the following cases:
[ON]: Activates demonstration mode and shows
various features on the display.
Demonstration starts in the following cases:
● When the menu screen is closed after [DEMO
MODE] is set to [ON].
● With [DEMO MODE] set to [ON], if there is no
operation for about 3 minutes after the power
switch is set to
switch is set to
.
● Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
● Demonstration only works with DC cord
connected, not with battery.
● If an SD card is in the camera, demonstration will
not take place even if it is set to [ON].
● [DEMO MODE] remains [ON] even if the camera
power is turned off.
OFF: Turns off operation sound.
BEEP: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording.
[MELODY]: Instead of a beep, a melody sounds
when any operation is performed.
BEEP: The beep sounds when the power is
turned on or off, and at the beginning and end of
recording.
[MELODY]: Instead of a beep, a melody sounds
when any operation is performed.
Changing the Menu Settings
Power Switch
Lock Button
49
MENU
MODE
INFO/
Common Menus for All Modes
PRESET
DEMO MODE
OPERATION
SOUND
SOUND
M5E6ASIA.book Page 48 Wednesday, September 28, 2005 7:07 PM