Innovaphone IP110 User Guide
Operating Manual
IP Telephones
- 27 -
- 27 -
7.1. Register
co-users
A co-user can be registered with your IP telephone as follows:
1. In the initial state, press the Menu key
followed by the function key
beside
“User list”.
2. Press the function key
beside a free line in the list (1-6).
3. To register a co-user, press the function key
beside “Registration” and then
the function key
beside “Settings”.
4. Now press the function key
beside
¾ the name and enter the name of the co-user.
¾ the number to enter the number.
¾ “Password” and enter the co-user’s password.
¾ “VoIP gatekeeper”. Specify the following desired values as described:
¾ the number to enter the number.
¾ “Password” and enter the co-user’s password.
¾ “VoIP gatekeeper”. Specify the following desired values as described:
Gatekeeper
name
name
If several gatekeepers are to be active at one address, a particular
gatekeeper is identified amongst them using the name entered
here.
gatekeeper is identified amongst them using the name entered
here.
Gatekeeper
IP address
IP address
Here, you specify the IP address at which the first responsible
gatekeeper can be reached.
gatekeeper can be reached.
Gatekeeper
IP address
IP address
There should be a further gatekeeper in the network in case the
first gatekeeper is unavailable. You enter the IP address of this
gatekeeper here.
first gatekeeper is unavailable. You enter the IP address of this
gatekeeper here.
¾ Options, Tones. Here, you set the country-specific tone standard.
7.2. Unregister or delete co-user
To unregister the active user or even delete them from the list, press the function key
beside the desired co-user. Then select the function key
beside “Registration”
and confirm the unregister or delete function with the relevant function key
.
7.3. Switch
user
If several users are registered with your telephone, incoming calls are signalled for all
users with specification of the called identity on the display. Outgoing calls are set up
with the data of the active user.
users with specification of the called identity on the display. Outgoing calls are set up
with the data of the active user.
To switch the active user, press the function key
beside the required entry and
confirm the new user with the function key
beside Activate.