Innovaphone IP110 User Guide
Operating Manual
IP Telephones
- 7 -
- 7 -
2.4. Return call
If no-one answers the call at the opposite terminal or you can hear the busy tone, an
automatic return call or automatic redialling can be initiated.
automatic return call or automatic redialling can be initiated.
2.4.1 Return call if engaged
If the opposite party is engaged, an automatic return call can be initiated. As soon as
the called party has ended the call, the IP telephone signals that the line is free again.
As soon as you pick up the handset, the call is initiated and the opposite telephone
rings.
the called party has ended the call, the IP telephone signals that the line is free again.
As soon as you pick up the handset, the call is initiated and the opposite telephone
rings.
Press the Menu key
if you hear the busy tone.
Press the function key
beside the “Return call” line on the display and hang
up to activate the automatic return call. Wait for the return call signal.
When the return call is signalled on your IP telephone:
¾ Pick up the handset or press the Loudspeaker key
to initiate the return call. The
call with the opposite terminal is set up.
¾ Alternatively, press the Clearing key
to reject the return call. The call is not set up
and is deleted from the list of active return calls.
2.4.2 Return call if no response
If the called party does not accept your call, an automatic return call can be initiated.
As soon as the called party has used the telephone, the IP telephone rings to indicate
that the subscriber is now available. As soon as you pick up your telephone’s handset,
the call is initiated and the opposite telephone rings.
As soon as the called party has used the telephone, the IP telephone rings to indicate
that the subscriber is now available. As soon as you pick up your telephone’s handset,
the call is initiated and the opposite telephone rings.
1. Press the Menu key
if you hear the distant dial tone.
2. Resume the procedure as described in chapter 2.4.
Note:
The telephone network of the call partner must support this feature.
The telephone network of the call partner must support this feature.
Note:
The telephone network of the call partner must support this feature.
The telephone network of the call partner must support this feature.