Sanyo NV-E7000 Service Manual
Page 3
PCB MAIN REMOVAL
Step 1 Remove 6 screws B which fasten the PCB-Main
Step 2 De-Solder the 4 LEAD WIRES placed on the PCB-Main
Step 3 Disconnect FPC from PCB-Main.
Step 2 De-Solder the 4 LEAD WIRES placed on the PCB-Main
Step 3 Disconnect FPC from PCB-Main.
Step 4 Lift PCB-Main up and disconnect FFC, 45P before fully removing PCB-Main (PCB-
Main can now be removed)
Main can now be removed)
B
FFC, 45P
PCB- Main
PCB- Main
LEAD WIRES
LEAD WIRES
FPC