Bosch ltc-1312-20 Specification Guide
2 | LTC 13xx and LTC 14xx Series FlexiDome Fixed Dome Cameras
Installation/Configuration Notes
115 (4.5")
77 (3.0")
35 (1.4")
63 (2.5")
Dimensions
Parts Included
Quantity
Components
1
LTC 13xx or LTC 14xx Series FlexiDome Fixed Dome Camera
with lens
Technical Specifications
Electrical
Models:
FlexiDome I
Monochrome
Monochrome
Color
Lens type
LTC 1311
LTC 1411
2.1 mm F/2.0
LTC 1312
LTC 1412
3 mm F/2.0
LTC 1313
LTC 1413
6 mm F/2.0
FlexiDome II
LTC 1321
LTC 1321
LTC 1421
2.1 mm F/2.0
LTC 1322
LTC 1422
3 mm F/2.0
LTC 1323
LTC 1423
6 mm F/2.0
Model No.
Voltage Range
Mono/Color Sys-
tems
tems
Monochrome
LTC 131x/10, 132x/10
LTC 131x/10, 132x/10
12 to 28 VAC or VDC
CCIR
LTC 131x/20, 132x/20
12 to 28 VAC or VDC
EIA
Color
LTC 141x/10, 142x/10
LTC 141x/10, 142x/10
12 to 28 VAC or VDC
PAL
LTC 141x/20, 142x/20
12 to 28 VAC or VDC
NTSC
Power is 2 W for all models.
Imager: Interline transfer CCD; 1/4-inch image format.
Imager: Interline transfer CCD; 1/4-inch image format.
FlexiDome I
FlexiDome II
Active Picture Elements:
PAL/CCIR
500 H x 582 V
752 H x 582 V
NTSC/EIA
510 H x 492 V
768 H x 492 V
Horizontal Resolution:
Color
330 TVL
470 TVL
Monochrome
380 TVL
570 TVL
Signal to noise ratio (Min.
AGC)
>46 dB
>48 dB
AGC
18 dB
20 dB
Sensitivity (3200 K):
Usable Picture (50IRE) Full Video
Monochrome
Scene illumination
Scene illumination
0.5 lux
(0.05 fc)
2.5 lux (0.25 fc)
Color
Scene illumination
Scene illumination
4.5 lux
(0.45 fc)
22 lux (2.2 fc)
F/2 lens, 89.9% scene reflectance.
Electronic Shutter
PAL/CCIR Models: 1/50 to 1/100,000 sec.
NTSC/EIA Models: 1/60 to 1/100,000 sec.
PAL/CCIR Models: 1/50 to 1/100,000 sec.
NTSC/EIA Models: 1/60 to 1/100,000 sec.
White Balance (Color Models Only)
Continuous Tracking (ATW): 2500 K to 9000 K.
White Balance Store (AWB): 2500 K to 9000 K.
Continuous Tracking (ATW): 2500 K to 9000 K.
White Balance Store (AWB): 2500 K to 9000 K.
Video Output 1.0 Vpp, 75 ohm.
Aperture Correction Horizontal and vertical.
Aperture Correction Horizontal and vertical.
Synchronization
Line-lock (when powered by AC): Synchronizes camera to power line zero
Line-lock (when powered by AC): Synchronizes camera to power line zero
crossing for roll-free vertical interval switching. Vertical phase delay can be
externally adjusted (continuously) to allow vertical synchronization in mul-
tiphase power installations.
Controls
Line-Lock Selectable On/Off.
Phase Adjust Range 330°
White balance ATW or AWB (color models only)
Backlight Compensation On/Off.
Line-Lock Selectable On/Off.
Phase Adjust Range 330°
White balance ATW or AWB (color models only)
Backlight Compensation On/Off.
Connectors
Video Out BNC.
Power Terminal block, power supply terminals are isolated from video out-
Video Out BNC.
Power Terminal block, power supply terminals are isolated from video out-
put BNC.