Adesso 1000 Software Guide

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

8 

 

Start of Configuration 

 

For series laser scanners, there are 3 scanning modes to suit 
your application requirements. 

 

Trigger Mode 

 
 

 

Pulse Mode 

The scanner becomes inactive 
as soon as the data is 
transmitted.  It must be 
triggered to become active 
again. 
 
The scanner will light up when 
press the pulse mode trigger 
switch once.  And, the 
scanner will turn off for next 
pressing.

 

 

 

The scanner becomes inactive as 
soon as the data is transmitted.    It 
must be triggered to become 
active again. 
 
In auto scan mode, the scanner is 
still active after the data is 
transmitted, but the successive 
transmission of the same bar code 
is not allowed when the trigger 
switch is pressed again. 
 
This scanner will light up when 
press the scanner trigger switch 
once.  And, the scanner will turn 
off for next pressing. 
 
This mode is similar to Auto scan 
mode, but double reading for the 
same barcode is prohibited if the 
scanner switch is pressed. 

 

Trigger mode 

 
 

 

Auto scan mode 

 
 
 

 

Alternate mode 

 
 

 

Repeat mode 

 

 

 

End of Configuration

 

9