GE ZISS360NRSS User Guide

8

Temperature Controls

To change the temperature display 
between Fahrenheit and Celsius, press 
Temp Display °C/°F.

The temperature display shows the actual
temperature of the freezer and fresh food
compartments. The actual temperature will vary
from the set temperature based on factors such
as door opening, amount of food, defrost cycling
and room temperature.

NOTE: Frequent door openings or door left open
for periods of time may increase the internal
temperature of the freezer and fresh food
compartments temporarily.

To turn off the cooling system in both 
the freezer and fresh food compartments, press
either 

pad until both displays show OFF.

To turn the cooling system on, press either 

pad. The preset temperatures of 0°F and 37°F

will appear in the display.

To check the current temperature setting 
for the fresh food or freezer compartment,
press the 

or 

pad once. After 5 seconds,

the display will return to the actual temperature.

To change the temperature settings, press 
the 

or 

pads to desired temperature set

point for fresh food and freezer separately. 
Allow 24 hours for the refrigerator to reach 
the temperature you have set.

NOTE: Setting the controls to OFF stops 
cooling, but does not shut off electrical power 
to the refrigerator.

34°F

1°C

–6°F

–21°C

45°F

7°C

+6°F

–14°C

To turn the Door Alarm feature on, press 
DOOR ALARM once. The ACTIVE light will come
on. To turn it off, press it again.

On models with a dispenser, the Door Alarm
feature is located on the dispenser panel on 
the front of the freezer door.

When the DOOR ALARM 
is active, the alarm will flash
and beep if you keep the door
open for more than 2 minutes.

Preset Settings: 
Allow 24 hours to reach these preset temperatures.