Lorex LW2201 Quick Setup Guide

Quick Start Guide

Digital Wireless Color 

Camera with Stand

Wireless Antenna 

for camera

Power Adaptor 

for camera*

• Aim the Cameras to best optimize the viewing 

  area: Select a location for the camera that 

  provides a clear view of the area you want to 

  monitor, which is free from dust, and is not in 

  line-of-sight to a strong light source or direct 

  sunlight.

• Avoid installing the cameras where there are 

   thick walls, obstructions, or interference (i.e. 

   transformers, microwave ovens or other 

   electrical equipment) between the Cameras and 

   the Receiver.

• Select a location for the camera that has an 

   ambient temperature between 14°F~122°F 

   (-10°C~50°C)

• Before starting permanent installation, have 

   another person hold the camera for you while 

   you verify its performance by observing the 

   image on a monitor. 

1. Carefully unpack the Camera.

2. Mount the stand to the wall:

    • Mark the position of the
       screw holes on the wall.
    • Drill holes and insert the 
       drywall plugs as needed.
    • Firmly attach the stand 
       to the wall using the 
       provided screws.

3. Attach the Antenna to the
    Camera prior to mounting.

4. Place the camera in the 
    desired mounting position. 
    Tighten the thumbscrews
    to secure the camera to the 
    Stand. Adjust the angle of 
    the camera until the 
    desired view is set.

*May not be exactly as shown

NOTE: AVOID INSTALLING IN A 

LOCATION WHICH REQUIRES 

THE WIRELESS SIGNAL TO PASS 

THROUGH CEMENT, CONCRETE 

AND METAL STRUCTURES. THIS 

WILL REDUCE THE 

TRANSMISSION RANGE.

Mounting 

Screws