Lorex lw2101 User Guide

 

 

 

10 

 
1. Carefully unpack the Camera. 
 
2. Mount the stand to the wall:  

•  Mark the position of the screw holes 

on the wall.  

•  Drill holes and insert the drywall 

plugs as needed.  

•  Firmly attach the stand to the wall 

using the provided screws. 

 
3. Attach the Antenna to the Camera prior to 
mounting. 
 
 
 
3.  Place the camera in the desired mounting 
position. Tighten the thumbscrews to secure 
the camera to the Stand. Adjust the angle of 
the camera until the desired view is set.  

 
 
 
 
 
 
 
 

 
The Camera can be powered either by using the provided Power Adaptor, or using the included Battery 
Pack (with 4 x AA Batteries). 
 
NOTE: Wireless cameras require a power source 
(either an electrical outlet or battery power) to 
operate. If you plan to permanently mount the 
camera in a location, it is recommended to use the 
included Camera Power adaptor to prevent 
interruptions in the image, as the battery adaptor 
is intended as a temporary power solution. 

Connect the Power Adaptor to the Camera. Make 
sure the power adaptor is placed into a grounded 
outlet or surge bar to protect the camera from 
power fluctuations. 

 

Power Adaptor: 
Connect the Power 
Adaptor to the Female 
Barrel Power 
termination on the 
camera.