Lorex lw2101 User Guide
Advanced Menu Mode
13
ENG
While in ZOOM MODE, you can Pan and Tilt the
Camera image using the Arrow keys on the receiver.
4. STATUS INDICATOR – The Status indicator
message “No Connection” will appear when a
camera cannot be found.
Advanced Menu Mode
Press the MENU Button on the Receiver to enter MENU Mode. Use the
▲▼◄► Buttons to navigate UP,
Down, Left or Right in the menu.
1. AUDIO VOLUME – Use the Left and Right arrows to change the
Audio Volume from 0 (off) to 20 (high).
2. SCAN TIME – Sets the Auto Sequence to OFF (you must press
the CAM Button on the receiver to see other channels), or 5
Second, 10 Second or 15 Second Auto scanning.
NOTE: Before turning on the Auto Sequence, make sure all
cameras are paired to the System.
Use the
1. AUDIO VOLUME – Use the Left and Right arrows to change the
Audio Volume from 0 (off) to 20 (high).
2. SCAN TIME – Sets the Auto Sequence to OFF (you must press
the CAM Button on the receiver to see other channels), or 5
Second, 10 Second or 15 Second Auto scanning.
NOTE: Before turning on the Auto Sequence, make sure all
cameras are paired to the System.
Use the
▲▼◄► arrows to navigate to each camera. Turn each camera to ON or OFF for Auto Detection.
NOTE: There may be temporary signal losses for
less than 1 second, due to the handshake
process between the Camera and Receiver
(when switching between channels).
less than 1 second, due to the handshake
process between the Camera and Receiver
(when switching between channels).