Lorex lw2711ac1 Quick Setup Guide

www.lorextechnology.com

LW2711AC1 Series Quick Start Guide_R1

Page 1

ContentS:

Quick Start Guide

Digital Wireless Color

Camera with Stand

Wireless Antenna

for camera

Power Adaptor

for camera*

• Mount the camera indoors or outdoors. For outdoor

installation, mount it in a sheltered place where it is not

directly exposed to rain or snow.

• Aim the Cameras to best optimize the viewing area:

Select a location for the camera that provides a clear

view of the area you want to monitor, which is free from

dust, and is not in line-of-sight to a strong light source or

direct sunlight.

• Avoid installing the cameras where there are thick

walls, obstructions, or interference (i.e. transformers,

microwave ovens or other electrical equipment) between

the Cameras and the Receiver.

• Select a location for the camera that has an ambient

temperature between 14°F~122°F (-10°C~50°C)

• Before starting permanent installation, have another

person hold the camera for you while you verify its

performance by observing the image on a monitor.

InStALLInG tHe CAMeRA

Before you install the camera, carefully plan where and

how it will be positioned, and where you will route the

cable that connects the camera to the power adaptor.

InStALLAtIon WARnInGS

1. Carefully unpack the Camera.

2. Mount the stand to the wall or

ceiling (for ceiling mounting you
may need to move the antenna
sightly down):

• Mark the position of the screw holes

on the wall/ceiling.

• Drill holes and insert the drywall

plugs as needed.

• Firmly attach the stand to the wall

using the provided screws.

3. Screw on the Antenna to the

Camera prior to mounting.

4. Screw the camera to the stand by

attaching it either at the bottom or
back of the camera. For ceiling
mounting attach to the back thread.
Loosen the thumbscrews to adjust
position of the camera and tighten
to fix position.

*May not be exactly as shown

NOTE: AVOID INSTALLING IN A

LOCATION WHICH REQUIRES

THE WIRELESS SIGNAL TO

PASS THROUGH CEMENT,

CONCRETE AND METAL

STRUCTURES. THIS WILL REDUCE

THE TRANSMISSION RANGE.

Mounting

Hardware Kit

DIGItAL WIReLeSS InDooR/oUtDooR

ACCeSSoRy MotIon CAMeRA

LW2711AC1 SeRIeS - QUICk StARt GUIDe

CAMeRA oVeRVIeW

1. PIR Sensor: Passive IR motion sensor for more accurate

motion detection.

2. Microphone: Built-in microphone for listening in.
3. Camera Lens
4. night Vision IRs: For viewing in complete darkness.
5. Speaker: For two-way audio.
6. Pairing Button: See manual for more details.
7. Antenna: Detachable antenna.
8. Power Cable

SIMPLY AWARE

™