Fujifilm S20 Pro User Guide

65

ISO

For external flash, refer to the user’s manual for the
flash and specify the settings as described below.
h Select External flash mode (TTL mode cannot be

used).

h Match the settings to the camera aperture setting.

Set the flash for the aperture setting measured by
the camera.

h Match the sensitivity setting (

➡P.33) to the

setting on the camera.

Select “ON” in this setting when using an external
flash unit. Synchronized shutter speeds up to
1/1000 sec. can be used.

●

The image may appear dark when the shutter speed is set to
speeds higher than 1/1000 sec.

●

Set the white balance (

➡P.59) to AUTO or Custom white

balance (

➡P.66).

±０

ＯＦＦ

ＯＦＦ

ＯＦＦ

ＯＦＦ

ＥＸＴＥＲＮＡＬ ＦＬＡＳＨ

ＥＸＴＥＲＮＡＬ ＦＬＡＳＨ

ＯＦＦ

ＯＦＦ

ＯＮ

ＯＮ

1 Close the built-in flash.
2 Attach the synchronization cord from the external

flash to the Sync terminal on the camera by
pushing the cord into the terminal securely.

●

Built-in and external flash units cannot be used at the same
time.

0

1

0

2

The mode can be set to “

N

”, “

M

”, “

<

” (

➡P.41, 42,

43) or “

>

” (

➡P.44), but the use of “

<

” or “

>

” is

better.

●

Flash photography cannot be used when continuous shooting
(

➡P.50) or auto bracketing (➡P.51) is selected.