GE 27881fe2 User Manual

14

3. Press FLASH/PROGRAM again to store your selection. You will hear a  

confirmation tone.

1. Press the FLASH/PROGRAM button until 

SET RING LEVEL shows in the display. 1HI 

is the default setting.

. Press 1,  or 3 on the base touch-tone pad to enter your selection, or use the 

REVIEW or NEXT button to scroll to your selection.

3. Press FLASH/PROGRAM again to store your selection.

NoTE: If you turn the ringer oFF, RINGER OFF shows in the base display.

You may choose from three different ringer tones.
1. Press the FLASH/PROGRAM button until 

SET RINGER TONE or RINGER TONE shows 

on the display. The default ringer tone is 1.

. Use the touch-tone pad to select 1, , 3 or use the REVIEW or NEXT button on the 

base unit or VOL/CID (- or +) button on the handset to scroll to your selection. The 
ringer tone plays for few seconds.

3. Press FLASH/PROGRAM again to store your selection. You will hear a  

confirmation tone.

Most telephone systems use tone dialing, however, some may still use pulse dialing. 
Depending on your telephone system, set the dialing mode as follows:
1. Press the FLASH/PROGRAM button until 

SET TONE/PULSE shows on the display. 

The default setting is 1TONE.