Bosch dvr4c1161 User Manual

Bosch Security Systems | Version 1.1

DVR4C | Installation Manual | Operating instructions

EN | 12

In playback mode, press to stop playback and to go

back to live mode.

In pause mode, press to go back to live mode.

If the beeper sounds, press ESC to silence it.

Stop key:

In playback mode, press to stop playback and to go

back to live mode.

In pause mode, press to go back to live mode.

In menu mode, press to move the current selected

position downwards.

In zoom mode, press to move the zoomed area

downwards.

Play key:

In live mode, press to start playback from the previous

playback point or, if no point exists, from one minute

earlier than the current position.

In menu mode, selects a submenu or menu item or

saves selections made in menus.

In pause mode, press to resume playback mode.

MENU: Press to activate the setup menu for

configuration of the DVR on the local monitor (in live

mode only).

COPY: Press to open the copy menu for copying video

to a USB stick in playback mode.

USB slot: Insert a USB stick into this slot.

The USB indicator lights for 10 seconds when the USB

stick is inserted into the USB port or when the USB

stick is being accessed for Read/Write in playback

mode.

SEQ: View cameras in sequence on full screen.

ZOOM: Zooms in on the active camera display.

QUAD: Press to display a quad screen in live or

playback mode.

3.2

Viewing pictures

The unit has one monitor output. The monitor picture

display depends on how the system has been set up. It shows

full screen or quad live or playback camera pictures.

Alarms, motion, and video loss warnings are also displayed

on the monitor. When the menu system is activated, it is

displayed on the monitor.

3.2.1 Quad screen

To view a Quad screen display on the monitor, press the

QUAD key.

3.2.2 Full screen

To view a full screen shot of a camera, press a camera key.

The camera key of the selected camera lights (green).

3.2.3 Sequence

To view a sequence of live camera pictures in full screen,

press the SEQ key. The sequence icon is displayed on the

monitor. A sequence of camera pictures appears, each for a

pre-programmed dwell time. Pressing the sequence key

again or selecting a single camera stops sequencing.

3.2.4 Image freeze

To freeze a camera shot on the monitor, press the pause key.

To return to live viewing, press the ESC key. This function

can be activated in full screen mode only. The zoom

function can also be used on a frozen picture. If you change

viewing mode, any frozen pictures are released.

3.2.5 Zoom

To zoom in on a camera picture:

1. Press the ZOOM key.

> The zoom icon is displayed on the monitor.

> The picture is enlarged by a factor of 2.

2. Use the Up, Down, Left and Right keys to select the area

of the picture you want to see.

3. Press the ZOOM key again to return to a full picture and

leave the zoom mode.

> The zoom icon disappears on the monitor.